How To Solder Wires Together

Ad Quality Solder Wire Drawing Machine.

How to solder wires together. You simply touch the freshly tinned tip of your soldering iron onto the bare wires for a couple of seconds and then apply the solder at which point it will smoke and flow over the wires almost immediately and you can withdraw the solder and then the iron and you should be left with a. The challenge is holding the wires in place long enough for the solder to cure. Solder the Wire Joint.

Using a Wire Stripper Strip the Wires to Desired Length. If the wire is stranded twist the strands together with your fingers. Lay them together overlapping at the soldered part then blob them together.

Twist and fold twisted helix and lineman splice. Make a solid mechanical connection. Repeat this process on the other wire.

Heat the joint not the solder. The wires will melt and will get soldered together. First place the solder on the tip to allow for melting.

Andrew Morton Andrew Morton. Replace the iron tip before turning on the iron while the iron is still cool. Dont use too much.

Use tweezers pliers etc. You can also apply some solder. The majority of solder comes in the form of a coiled length of wire or less commonly as pellets with a range of diameters or gauges available to suit various applications and joints.