How To Make A Soldering Iron Stand

The iron will take a few minutes to reach its operating temperature of about 400C.

How to make a soldering iron stand. Place the soldering iron in its stand and plug in. Thanks to Mitch Altman for demonstrating the technique which has come in handy multiple times during our soldering workshop tour. FREE Shipping on orders over 2500.

- slowly neatly wrap the wire into a coil a dozen times. The first thing to do is cut a piece of flat tin into a 6 x 4 rectangle Click here to add your own comments. Use a soldering iron to solder on the corners of the box frame.

Add 1mm to 3mm of solder pull the solder away keep the tip on the pad and lead for 1 more second and pull the tip away and it should then be totally fine. Begin taking a piece of the solder and placing it on the corner of your box frame applying heat from the soldering iron to fasten the corner. Find a suitable spot and drill a hole on your terracotta tile.

- since it is now locked onto the broomhandle get your metal-blade hacksaw and cut the wire exactly where it enters the hole. Make a 120 degree bend in the straight side pointed towards the middle of the circle. I also made a soldering wire holder and to make it I used some thick wire with a metallic plate and attached it to the base by drilling a hole near the Soldering iron stand I used wood and nut bolt to fix it.

For its manufacture does not require much time as well as special tools. Wait a few seconds to let the tip heat up again before proceeding to step 4. Choose items to buy together.

The prepared spring is inserted into the jar and the structure is fastened with a bolt and nut. Touch the solder to the tip of the iron and make sure the solder flows evenly around the tip. Hold the soldering iron in one hand and solder in the other.