How To Properly Tin A Soldering Iron Tip

Plug in the iron and switch it on.

How to properly tin a soldering iron tip. It will make your soldering iron long-lasting. Next hold the iron tip on the desired junctionjoint for a couple of seconds and feed a bit of solder onto the solder tip where its touching the joint. When you have finished soldering apply a little solder to the tip and then turn the soldering iron off.

Instead set the iron to a very low temperature 500F 260C. Thats how you can tin your new soldering iron. Apply liquid flux to the working area of the tip and submerse it into the molten solder in a smooth even motion.

Wrap electrical solder on the tip covering ¾ of the length of the tip. This step will coat the iron in a mixture of flux and solder. Wipe the iron on a damp sponge to remove the excess.

Clear a work area then grab your soldering iron a solder sponge and water. Same goes for the old soldering iron but in a. Wait till the Solder melts.

Look for tinning products that also function as cleaners when reconditioning the tip. The free-flowing liquid will coat the tip. A polyurethane foam bar with embedded abrasives which is used to polish the working end of the tip to remove surface oxides.

When tinning a brand new iron tip dont tin at high temperature 700F 371C or 800F 426C. Typically advised to be conducted after unpacking a brand new tool here are the steps on tinning a soldering iron. This should lead to a clean shiny tip ready for use.