How To Clean Soldering Iron Tip Without Flux

Then heat the soldering iron nearly at 39 c.

How to clean soldering iron tip without flux. Wipe the iron on a damp sponge to remove the excess. I found that without solder it is very. If you feel all the solder isnt yet removed feel free to repeat this process to remove any remaining solder.

Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. It will liquefy and clean up the wires so the solder sticks nice and securely. This can be done with a damp sponge or non-abrasive tip cleaner.

The maintenance of a soldering A soldering iron tip should be cleaned regularly by removing any oxidized solder flux residue and debris from the tip. When done correctly the liquid solder should attach to the cold screwdriver properly thereby allowing you to get rid of it from the surface. Do not allow the iron temperature to rise too high before applying the solder because excess heat will cause the tip surface to re-oxidize and no longer accept the solder.

Its something of a vi-vs-emacs war about which is better but whatever. A clean and tinned soldering tip conducts heat through the desoldering braid better and starts the wicking action faster. Do not touch it with bare hands.

After heating it apply a thin layer of the Solder on the tip. Before starting tin the soldering tip by adding fresh wire solder to it. This should lead to a clean shiny tip ready for use for more info see this video.

If the tip is plated it should never be filed or heavily abraded. How to clean and re tin your soldering iron - YouTube. In case you are going to use a soldering wick without a flux it would be better if you add it.