How To Clean The Soldering Iron Tip
Take either a wet sponge or wire wool.
How to clean the soldering iron tip. If all else fails Soldering Iron tips do not last forever. How to clean and re tin your soldering iron - YouTube. Use a damp sponge to clean the tip and wipe it off quickly to avoid cooling the tip excessively.
Wipe the iron on a damp sponge to remove the excess. Avoid using low-residue flux or dirty flux. Leave it there until the paste melts around the tip.
Wipe the iron on a damp sponge to remove the excess. If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the. Cleaning the tip after every soldering session.
Repeat the Process 3-4 Times until the Soldering Tips start Shining. This should lead to a clean shiny tip ready for use. Wipe OFF the solder on the Cleaning Sponge or Copper Wool.
Heat your soldering iron up to the low end of a typical work range generally between 280 and 320C. Now remove the tip and clean it with a moist sponge to remove the cleaner. Melt some good quality of solder wire on the Tip.
Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. This step will coat the iron in a mixture of flux and solder. Then dip the tip in the cleaner and do a slight twist action.