How To Clean A Burnt Ceramic Iron Soleplate

Let the iron dry completely before plugging it in and using it again.

How to clean a burnt ceramic iron soleplate. Dip a cotton swab into distilled water. With a clean wet cloth remove the paste after it has stayed on the iron long enough. Set the iron on the highest temperature.

To remove burnt fabric from the bottom of your iron. Spread the paste over the irons soleplate. Remove the remaining traces by unplugging the iron and placing it with the soleplate down in a tray of ice cubes for 5-10 minutes to allow the plastic traces to freeze.

Use this to clean the steam holes on the irons soleplate. Prepare a thick paste of 3 tbs. Then use that wet cloth or towel to wipe out the scorched marks on the soleplate.

How to descale an iron. After the marks disappear clean the soleplate again using water. Iron the paper with the heated iron.

Somebody ironed some black nylon shorts on the cotton setting and got melted plastic all over the white ceramic soleplate. The Faultless Iron Cleaner was able to remove the freshly ironed fusible interfacing and a bit of the long-term built-up brown gunk but there was still quite a lot of the built-up brown gunk remaining on the soleplate particularly the brown gunk that was in the. Then rub this paste on the irons soleplate by using a.

You will need to warm up a sufficient amount of white vinegar. Broke bike one broke bike two broke iron three. This cleans a very burnt or rusty soleplate and due to its abrasiveness should be left as a last resort to save an older iron.