Proper Way To Solder Two Wires Together

Soldering Two Wires Together End to End.

Proper way to solder two wires together. How to solder standed wires like a professional. Once the connection evenly turns the correct silver color of solder remove the soldering iron and allow the joint to cool. Tools need will be a soldering iron heat machine rosin flux solder 3M silicone dielectric grease wire s.

The proper way of making safe. This video starts by showing the simplest technique for twisting two wires together which commences by baring the ends and overlaying them at 90 to each other as shown below. When soldering wires with a big diameter it is not easy to bend or twist them.

This process should melt the solder and coat both wires evenly. After making the repair let it cool slightly. While there are probably a thousand different ways to do this there are.

Soldering Wires Together One of the first things I learned to do when I was being trained to solder was the proper way to tin and prepare wire for soldering. For this example we use a soldering iron to solder two 18 AWG wires together end to end. Youll get a straight wire that has a little sideways bump in it so get a larger shrink tube to isolate it youll need two times the diameter of one wire.

Repeat this process on the other wire. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. Clean the ends of the stripped wire with some sandpaper or steel wool.

When done properly you have a strong conductive connection that turns two separate wires into one. Strip off about 1 inch of the insulation from each end of the two wires using the wire strippers. Solder the twisted wires at the point where the twist began.