How To.clean Old Brass

As with polishingrefinishing anything the trick is to proceed from the coarseaggressive to the fine.

How to.clean old brass. This coating is properly referred to as lacquer cause thats what it is unfortunately in my experience the only thing that will reliably remove it is stripper. Cleaning Brass Properly Soak the item in warm soapy water for several minutes then gently scrub with a soft toothbrush to remove dirt. Cleaning old and antique brass can be a very frustrating endeavor because over time the brass oxidizes and becomes covered in tarnish.

Simply rub a thin coat onto the brass let sit for an hour or so and then clean the piece with hot soapy water. One way to remove tarnishing is to use abrasives like sand paper or polishing creams. Dont be afraid to really scrub some of those tough tarnish spots or use your fingers for tiny detailed areas.

Wipe the surface clean wipe with a clean cloth and. Simply dip the brush into the WD40 Spray and start to wipe the brass like you are painting a picture and the wd40 will lift the dirt and re-hydrates the old brass that has dried out over the years. After youve applied the WD40 let it soak into the brass and wiping away the excess after 30 minutes.

A shop rag is perfect for working the chemical solvent into the lacquer. How to Clean Brass With Vinegar. A toothbrush will help you get into all the nooks and crannies.

You can use your own concoction of soap and water or purchase premade cleaning packets like our Instaclean Brass Cleaning Packs that make it easy to clean in loads of 500. This can be seen on old. Two ingredients is all it takes to safely and gently clean all your favorite brass items.

The small pins get into the brass cases and even inside the primer pockets to get every inch of brass nice and clean. Any such mechanical polishing removes some of the metal every time you do it. Beside above how do you clean old brass finish.