How To Take Out Broken Headphone Jack From Ipad

Remove it and gently mold the opening with whatever you want I used a toothpick carefully a little at a time while testing it over and over again until it finally is just wide enough to slide over the broken headphone jack while still remaining tight enough to grip the broken piece with sufficient friction.

How to take out broken headphone jack from ipad. Now place the burr back into the jack socket and gently feel around until the burr is located in the notch you cut. Ive been bummed for 2 12 months while I struggled with the loss of audio from my iPad. Another option is to use a dab of super glue to reconnect the two broken pieces of the headphone plug.

Turn off your Dremel tool and remove the burr. I talked with the company IT guy and he presented several options. I dropped my iPad in water and some water went in my headphone jack.

Screw the sheet metal screw into the hole about 6 turns. Apply a little side pressure and carefully pull the burr out and the broken jack part should pop right out. Is there anyway to fix this so I can listen to my music.

If it doesnt work. Insert the end of the tube into the socket and push it firmly down until it grips the broken jack. Maybe kind of hard to picture but stereo headphones are in 3 sections the end section is stuck in there.

I started trying to pull it out and the plug broke and is stuck in the phone. This meant that I couldnt hear anything without using headphones. After that slowly push the bare end of the swab into the jack and spin it to brush off the sides of the jack and dislodge any debris.

Once you are sure it has dried and cooled remove the ink tube and voila. Turn the phone upside down to remove any metal particles. Repeat a little drilling screwing in and pulling until the piece comes out.