How To Solder Wires Together With A Soldering Iron

Apply Solder Flux to the Wire Joint.

How to solder wires together with a soldering iron. Hold the two tinned wires on top of each other and touch both wires with the soldering iron. Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. The easiest way to solder with a soldering iron is to twist the wires together and heat them directly.

At first take the solder near the male header and slightly touch the solder with the soldering iron. Ad Quality Solder Wire Drawing Machine. Tinning is the process of melting the solder around the wires.

To solder these wires together you will have to heat the ends of these wires and then apply your solder to the opposite side of where the wires are exposed. This process should melt the solder and coat both wires evenly. You can do this tinning part in two ways.

You can solder any metal objects together even wires to other wires. Slide the iron to the end of the connection and then to the other end. The challenge is holding the wires in place long enough for the solder to cure.

Lock and Firmly Twist the Stripped Wires Together. Makes it easier to easily solder wires together in tight areas. Place tip of soldering iron at the middle of the connection to activate the flux.

Add the proper amount of solder into the connection. First you need to strip the wires then add your heat shrink tubing physically connect the wiressolder the wires together and then shrink that heat shrink tubing to make a waterproof connection. Use a Gas Torch.