How To Solder Wires Together (best Tips And Tricks)

Preload the Soldering Iron Tip with Solder Wire.

How to solder wires together (best tips and tricks). Remove the soldering iron and wait a few seconds to let the soldered connection cool and harden. Once every item has been tinned place the wire end which has been bent to a small L shape up to the solder on the rail. Take the solder in your non-dominant hand and the soldering iron in your dominant hand once again.

A pig-tail where the wires are bent at a 90-degree angle to the rest of the wire is NOT a suitable connection and will cause problems dont do it. How to Solder Wires Together. I show you how to strip the wires add heat shrink splice the wires solder and melt the heat shrink to make a perfect soldered connection.

This will leave a small glob of melted solder on the soldering iron. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of wire. Sep 9 2016 -.

Melt just enough solder to make the joint and then pull the iron away. Hold the two tinned wires on top of each other and touch the soldering iron to both wires. We clean the soldering tip and we place the components one by one so I will solder this IC socket which has 16 pins.

Solder the Wire Joint. How to Solder Wires Together Best tips and tricks - YouTube. Starting the soldering task and as I told we need first to set the soldering iron tip and then we heat it up once its ready to use you can notice that the soldering wire is molten easily.

The first step is you need to strip your wires. This process should melt the solder and coat both wires evenly. Best solder tips together tricks wires Previous Post Wiring Specialties Engine Tranny Harness for 2JZ 2JZGTE into 03-07 350Z Z33 G35 Next Post 1967-1972 Chevy or GMC Pickup Truck Complete Modern Update Re-Wiring Harness LS.