How To Solder Wire Tips

Then the obvious supplies like soldering iron iron tips solder.

How to solder wire tips. Solder the Wire Joint. You can also apply some solder. Things to help a lot with the soldering process are a soldering iron holder and cleaning sponge.

For un-strippable wire you will want to crank the temp up to 750F and of course use a high temp solder. With the soldering iron in one hand and solder in the other place the soldering iron tip at the end of the twisted core. Hold the two tinned wires on top of each other and touch the soldering iron to both wires.

The process will form a good solid joint. Apply Solder Flux to the Wire Joint. Touch the tip of the solder to the tip of the soldering iron to create a small pool of liquid solder on the irons tip.

Using a Wire Stripper Strip the Wires to Desired Length. After wrapping the wires tightly around each other use a soldering iron to heat the wrapped portion of the wires. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of wire.

This will heat the wire. Apply some solder to the wire tip and make the soldering. Hold it for 3-4 seconds on the wire.

Lock and Firmly Twist the Stripped Wires Together. Repeat this process on the other wire. To solder wires grab the proper tools to work with wire such as wire cutters wire stripper and plyers.