How To Solder Two Solid Wires Together

Plug the soldering guniron into an electrical outlet and allow it to heat up for about three to five minutes.

How to solder two solid wires together. Soldering Two Wires. For small wire form a shepherds crook in each wire to link them together or twist them together pigtail splice them solder. There are multiple techniques for splicing wires without solder that result in a tight wrap including some that overlap the wires before twisting to give a larger overall spliced area.

This will heat the wire to allow your solder to melt. Place soldering iron under the wire. First place the solder on the tip to allow for melting.

Other is to put the solder with the targeted tips and place the hot iron in the joint. Strip off about 1 inch of the insulation from each end of the two wires using the wire strippers. Cut the two wires to be soldered together to the appropriate length as needed for your project.

This process should melt the solder and coat both wires evenly. This requires a greater length to be stripped of insulation and can be tricky if the wires differ in diameter or if one is stranded and the other solid. If possible you should twist the wires in-line before soldering as this makes a stronger and neater join than twisting the ends together.

Using a lighter or heat gun shrink the tubing down on the connection. Connect together stranded wire and solid wire as shown in the third picture. The best way to splice wires is to wrap them together tightly using multiple twists to ensure maximum contact between the two wire sections.

You need to wrap the wires one around the other. If you want to join two wires with solder the first thing you should do is to tin the two wires. Now that the two tinned wires are wrapped around each other we can re-apply the soldering iron and the solder from each wire will melt and mingle forming a nice solid solder joint.