How To Solder Three Wires Together

Soldering Two Wires.

How to solder three wires together. A pig-tail where the wires are bent at a 90-degree angle to the rest of the wire is NOT a suitable connection and will cause problems dont do it. Twist these exposed threads together so they do not fray. Next 1-2mm off the end of each wire.

Its not too difficult. Soldering Multiple Wires for a Distribution Joint Step 1. Connect together stranded wire and solid wire as shown in the third picture Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires.

First place the solder on the tip to allow for melting. In electrics we just twist two three or more wires together with linemans pliers and then cap the splice with the correct wire n. Dont use too much.

The wires will melt and will get soldered together. There is one way to twist wires together for soldering- a horizontal twist that yields a continues length of wire. Make seven or eight turns and cut the excess of the wire.

Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. Identify and Strip input Wire and output Bundle. Hold it for 3-4 seconds on the wire.

Heat up the joint and melt the solder with the wire not the soldering iron. Then practice soldering two wires together after youve tinned them. If you want to join two wires with solder the first thing you should do is to tin the two wires.