How To Solder Copper Wires Together

If the wire is stranded twist the strands together with your fingers.

How to solder copper wires together. Move it around the parts where you are going to place the solder afterwards. Bring both stripped ends together like shown in the image below. After tinning the heads of both header and wire put them together.

N ot all metals can be soldered easily. First place the solder on the tip to allow for melting. Strip off about 1 inch of the insulation from each end of the two wires using the wire strippers.

How to Solder Wires Together Best tips and tricks - YouTube. This solder is going to melt against the tip and wire so its going to speed up the heat transfer between the tip and the wire. Connect together stranded wire and solid wire as shown in the third picture Use a thin solid wire 28 AWG-30 AWG and wrap it around both wires.

When working with large amounts of copper wire outside of electronics it may be beneficial to apply solder flux either purchased or made at home from rosin and alcohol before proceeding. Plug in your soldering iron to let it heat up and put on all the necessary safety gear. Cleanliness is a must for good solder joints.

Soldering The Header Tip And Wire Together. For outlets you can pigtail or just connect an AlCu rated outlet. Begin by laying out all the items containing copper wire that you wish to solder.

Touch the tip of the soldering iron to the copper wires. Now its time to show you how to solder wires together. The challenge is holding the wires in place long enough for the solder to cure.