How To Solder 2 Thick Wires Together

There are three main ways to solder wires together.

How to solder 2 thick wires together. When done properly you have a strong conductive connection that turns two separate wires into one. Tin the soldering gun ie melt a little solder on it. Slide heatshrink glue lined sleeving over the join on the soldered bit only then slide more glue lined heatshrink over the whole of the area an seal the whole lot.

Ryan likes to use these little roach clip things to hold one of the wires. Choosing the Right Solder Wire. You should see the solder flow between the strands through the whole bundle.

Repeat the tinning process on the other wire. Soldered joints are mechanically weak. Slide the iron to the end of the connection and then to the other end.

Now place the two tinned wires together and hold still while heating them with the soldering iron so that the tin on both of the wires melt together. When soldering it is always a good idea to disconnect the wires from the electronics whenever possible as the heat can easily transfer to the electrical components. 8 128 a little over 18 inch.

Apply a drop of solder flux on top of the wire connection. This process should melt the solder and coat both wires evenly. Extending the heat shrink about 12 to 1 passed the solder joint on both sides.

Also I would cover the resulting joint with a piece of heat-shrink tubing before deploying it in the field. Ad Quality Solder Wire Drawing Machine. In the old days radio and television engineers utilised the 60-40 solder mix.