How To Solder 2 Small Wires Together
The best way to splice wires is to wrap them together tightly using multiple twists to ensure maximum contact between the two wire sections.
How to solder 2 small wires together. Tin the wires by applying a small amount of solder to the ends of each wire to just barely cover the wire. With the wires you want to join twisted together and held in place pick up your soldering iron in one hand and your solder in the other. Tin the wire.
I just did exactly this the other day - these LED strips are neat. Put just enough solder to fill the joint. Heat the copper and apply solder to the side opposite the heating implement.
Obviously these should not be connected to a power source at the time. Make sure the wire has dried and all solvent is removed before adding heat. Heat the pads and melt a small amount of solder on to each pad and let it cool.
Youll get a straight wire that has a little sideways bump in it so get a larger shrink tube to isolate it youll need two times the diameter of one wire. Put a little solder on the tip of the iron to bridge the gap between the iron tip and the wires to be soldered. Try using nail polish remover or other solvent to remove the coating.
If you can solder do that and then best to put a piece of heat shrink on it. Because it is conical it presses the wires tighter together the more it is threaded on. Wire nuts have a conical threaded metal insert in the tip which when tightened onto the wires cuts into them.
How to Solder Two Small Wires - YouTube. Twist and fold 2. Automotive wiring should be soldered and protected properly in order to withstand all types of weather rain snow and salt.