How To Properly Solder Wires Together

You can solder any metal objects together even wires to other wires.

How to properly solder wires together. You should cover all of the wires with solder. For large gauge wires 14awg for an antenna perhaps make a Western Union splice then solder it. Be able to solder most small electronic components and small circuits together yourself.

Add the proper amount of solder into the connection. Tin objects that you intend to solder together by holding the soldering unit tip at a slight angle with the line of the chisel point parallel to the side of the work. When done properly you have a strong conductive connection that turns two separate wires into one.

Lock and Firmly Twist the Stripped Wires Together. The process for soldering 3 wires together is the same as splicing 2 4 or even 10 of them. Secure both sides of the rejoined wire so they wont move when touched with the iron.

While there are probably a thousand different ways to do this there are. This will heat the wire to allow your solder to melt. Make sure to hold the wire and connector together.

If the wire is stranded twist the strands together with your fingers. Preload the Soldering Iron Tip with Solder Wire. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires.

Capillary action plays an important role in distributing the solder throughout the splice. For small wire form a shepherds crook in each wire to link them together or twist them together pigtail splice them solder. This will likely match your pipe diameter.