How To Prepare A Soldering Iron Tip

It also minimizes exposure beyond the surface of the tip.

How to prepare a soldering iron tip. Then dip into the tin of tinner cleaner with a slight twisting action. Use set screws to re-assemble the iron. To prevent this you use solder to protect it.

This step will coat the iron in a mixture of flux and solder. Fit the tip back to the heater assembly once. 600- 650F 316- 343C is a good place to start for lead-based solder and 650- 700F 343- 371C for lead-free solder.

Then tilt the tip and align it to the pointed part to restore its shape. Tinning will also help to protect the tip and reduce wear. To maintain the performance of any soldering iron tip a simple maintenance procedure is recommended.

Turn on the soldering iron and set temperature above the melting point of your solder. When it comes to the sponge cleaning method be sure to use de-ionized water to prevent contamination as well as a sponge specially-rated for soldering so it is sure to withstand the high temperature. Apply a little solder to the irons tip and place the iron on top of the wire and lightly press down towards the rail.

Begin by making sure the tip is attached to the iron and screwed tightly in place. Once every item has been tinned place the wire end which has been bent to a small L shape up to the solder on the rail. To use the Tip tinnercleaner heat the soldering iron.

Operating at temperatures exceeding 850F dramatically increases the formation of iron oxides which. Apply very little flux in the solder joints and make the soldering. Again the easy tip was made into a screw at one end of the brass rod screwed into the soldering iron and then cut off of the rest of the rod.