How To Make Soldering Iron Tip Cleaner

The flux in tip cleaner removes the oxidation and build up from the soldering iron tip and then the solder re-tins the tip ready for use.

How to make soldering iron tip cleaner. Wipe the iron on a damp sponge to remove the excess. Melt some good quality of solder wire on the Tip. This should lead to a clean shiny tip ready for use for more info see this video.

How to Clean Soldering Iron Tip. This should leave the tip of the iron with a layer of solder on it. This step will coat the iron in a mixture of flux and solder.

The best solder for oxidation prevention is one with a high amount of flux core. Adjust the soldering irons temperature to about 750 degrees Fahrenheit 39 degrees Celsius After a minute check if the iron is hot enough to steam when touched to the sponge. There is No negativ or positiv Rail.

If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the. Then dip into the tin of tinner cleaner with a slight twisting action. Make your own solder tip cleaning pad quickly and cheap.

Just wipe the oxidized tip at normal soldering temperatures into the tip tinner for a few seconds until the bright tinning surrounds the working end of the tip. Soldering iron only works if there is a temperature difference. Select the proper tip size and shape for the application Apply solder to the connection and not directly to the tip If solder must be applied directly to the tip vary the contact point.

Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. To combine two dots Just use enough solder. Heat from the solder tip will activate the flux and start the chemical reaction that removes oxides.