How To Connect Wire To Circuit Board Without Soldering

Re-soldering is your only option.

How to connect wire to circuit board without soldering. Use of Alligator clips Alligator clips are cheap and readily available in hardware or electric shops. The pins may be a weak point though. A decent connection between wire and banana plug can be done without soldering as well.

Repeat the same procedure on the remaining leads. Tools and materials needed to solder You will need tools like soldering iron soldering wire soldering paste paste flux or liquid flux and damp solder sponge and a circuit board you can find a universal board as a carrier of soldering or you can use the PCB boards manufactured by a professional PCB fab house I. To summarize a good solid connection when soldering wires to a board will have the following characteristics.

You cant use super glue instead of solder or tie the wires together but you can use techniques such as splicing and connecting the wires with caps. Then heat it at a high temperature of 300 to 400c. Id recommend that you twist each wire end and tin it - heat the wires with the soldering iron and melt solder into the twisted wire ends so that it is solid.

These prototype boards enable the designer to reduce solder connections and the number of wires you need to connect different circuit components. Normally you solder a male header to the board and if you arent plugging them directly into another board you connect them with either ribbon cables or jumpers that have individual sockets on the end. These include IDC headers crimped headers flex cables etc.

Use tiny cable ties and slide it through the circuit board and wrap it around the wires to hold them in place. Heat the connector with the soldering iron. Then heat the solder spot and push the tinned wires onto the solder spot while it.

Click to see full answer. Lastly put Solder on the wire especially on the tip. If you are soldering wires to a circuit board strip the insulation ends of the wires and solder them.