How To Clean Your Soldering Tip

Set the temperature of the soldering iron between 250C and 300C.

How to clean your soldering tip. -- Yeah you should just have to stab it into the tinner and promptly wipe it off with a sponge or metal sponge. Then push it on a clean sponge for cleaning. Dip the tip into the tinner making sure that the entire oxidized surface is in contact with the re-tinning product.

This video will show you how to clean your soldering tip and maintain it for many years of use. When youre finished with your soldering job you will have less to clean from the tip if you wipe the iron periodically while using it. If you want a more specific guideline 600 grit sandpaper is often recommended as the best to use on soldering iron tips.

When pre-cleaning is necessary for plated tips they should be cleaned with a mildly abrasive emery cloth and may require an acid flux to remove the oxides before tinning or re-tinning. If the oxidation is being really stubborn the tip might be gone. Its just some solder alloy it coats the tip with.

In this case it is necessary to use Tip Tinners for a more powerful cleaning of the oxidized tip. It hampers a neat and clean desoldering of the circuit board. You also can clean your soldering iron tip with a sponge while using it to keep it clean.

Not only does heat not transfer as well through this debris but the contaminants also prevent solder from wetting or sticking to the tip. This should lead to a. A tip tinner and cleaning paste can be used to re-tinner your tip.

To clean your tips use either brass or stainless steel wool. After every cycle and before you start to solder always clean your tip. This is done by first ensuring the tip is clean and free of surface oxides.