How To Clean Your Solder Iron Tip
New tips require an initial seasoning which is simply.
How to clean your solder iron tip. You should not have to do more than periodically wipe the tip clean with a damp sponge then re-tin with fresh solder. Electronix Express points out that in order to remove the dirt and debris that accumulates on the tip of a soldering iron it is necessary to wipe it clean with a sponge. Take either a wet sponge or wire wool.
A solder pot may also be used to tin or re-tin your soldering iron tip. Set the temperature of the soldering iron between 250C and 300C. Clean the tip After every cycle and before you start to solder always clean your tip.
Wipe the iron on a damp sponge to remove the excess. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged. When you are done for the day simply wipe clean as the iron is cooling and it will be ready to go the next time.
If all else fails Soldering Iron tips do not last forever. Then dip into the tin of tinner cleaner with a slight twisting action. On a fine pointed tip this will be even more evident.
The best tip tinner is your solder--tips should always be coated with a small amount of solder. Melt some good quality of solder wire on the Tip. Sandpaper can be a useful tool for maintaining your soldering iron tips but it can also cause damage if misused.
Switch OFF the Soldering Station or the Iron. Of the tip regularly. Insert the Tip in Good Quality Tip Tinner.