How To Clean Soldering Iron Tip After Use

How to clean and re tin your soldering iron - YouTube.

How to clean soldering iron tip after use. This is meant to be moistened. First go read up on soldering iron care. That clears off flux residue and some of the oxidized solder.

Usually the solder protects it are you cleaning the solder off and leaving the iron hot. To use the Tip tinnercleaner heat the soldering iron. It took a lot of effort with tip tinnercleaning compound to make the solder wet the tip again.

Try not to leave the iron sitting hot on the bench while not in use. You also can clean your soldering iron tip with a sponge while using it to keep it clean. This step will coat the iron in a mixture of flux and solder.

To apply the tip cleaner first heat the soldering iron. Then dip into the tin of tinner cleaner with a slight twisting action. Repeat the Process 3-4 Times until the Soldering Tips start Shining.

How to Tin or Re-Tin Soldering Iron Tip. Soak the sponge in water and rub it over the tip of the soldering iron for a. Push the soldering iron tip into the chemical cleaner until the entire rusted area is submerged.

If it doesnt you need to remove all solder and grind the tip again more thoroughly. Once the re-tinning product melts around the tip hold it for several seconds and then clean the tip using dry cleaning methods like brass wool or an automatic tip cleaner. Wipe the tip clean and re-tin it between every joint.