How To Clean Solder Gun Tip

But for the harder to remove stuff I keep a brass wool pad handy.

How to clean solder gun tip. This will push the solder out of the holes and solder. Clean the Tip Do not clean your soldering tip with anything other than a polyurethane sponge or brass cleaning wool or brush. Try using a sewing pin with a plastic head even a correct size safety pin works and heat up the tip and the solder pad at the same time once the caps are removed.

If your soldering tip becomes detinned oxidized it can be restored in a number of ways. To clean your tips use either brass or stainless steel wool. Or you may find luck with a flameless heat gun.

Once the tip is clean let it return to the operating temperature. Each of these items is soft and pliable allowing the tip to become clean from all angles. Tin the tip with a small amount of solder wiping the excess off with the scrubber.

You may also use a desoldering iron to remove the solder. Use a soldering iron to heat the solder you want to remove. Just try to wipe it off after every 4-5 solder joints.

This step will coat the iron in a mixture of flux and solder. Metal wool effectively removes dirt and other contaminants and avoids issues associated with using a damp sponge to clean soldering tips. Knack for effective removal of solder using the desoldering wire.

Apply a small bead of solder to the copper part of the tip. How can I remove melted plastic off my soldering iron. This should lead to a clean shiny tip ready for use.