How To Clean Silver Solder Flux

The dense composition is always preferred over liquid in manual soldering.

How to clean silver solder flux. Removal is generally accomplished by thorough washing in warm detergent water or in hot water containing dilute hydrochloric acid followed by hot water rinse. Take a clean brush. Stay-Silv White Brazing Flux.

The pickle solution described in the work area section is an acidic bath used to clean the jewelry. Solder Flux Thin paint brush for applying flux Jar of water Soldering block Tweezers Pickle solution Torch. Once you have added flux to the metal simply wait for the water content to evaporate.

The first step is an active chemistry that removes the flux and generally clean the parts of any oxide surface. If you are soldering jewelry just dip it in the cleaning solution until the jewelry piece is clean. After soldering the excess flux and flux residue can be cleaned with ethanol or methanol.

Just like any soldering task clean the solder then apply the flux. Cleaning up flux from silver solder joints. You can get One Shot Drain Cleaner from places such as Homebase BQ etc.

Avoid no-clean soldering flux as solvents it cant remove these. If it occurs use any fresh solvent to. Which is something like 92 sulphuric acid and works fine when diluted.

Various types of flux would work best with silver soldering. Wipe of the excess flux from the soldered joint with a piece of paper towel. The brush should be flexible and soft so that it wont damage the sophisticated electrical components.