How To Clean Black Soldering Iron Tip

A Compressed Cellulose sponge which has been wetted with water.

How to clean black soldering iron tip. Turn off your solder iron and let it cool down for 15-20 minutes before cleaning the tip. A Dry Cleaner special brass wool can also be used. Melt some good quality of solder wire on the Tip.

Then dip the tip in the cleaner and do a slight twist action. Wipe the iron on a damp sponge to remove the excess. If all else fails Soldering Iron tips do not last forever.

The black stuff is oxidized solder and or iron from the tip plating. This should lead to a clean shiny tip ready for use. Once this happens I find that the best cure is to use a tin of tip cleaner mine is Archer brand from radio Shack ancient but effective.

Clean the tip After every cycle and before you start to solder always clean your tip. To use the Tip tinnercleaner heat the soldering iron. Wire wool has the advantage of not cooling down the soldering iron too much and you dont have to wait for the iron to get its desired temperature.

This step will coat the iron in a mixture of flux and solder. How to Tin or Re-Tin Soldering Iron Tip. After cleaning in tip cleaner wipe on a damp NOT wet sponge then thoroughly cover in solder to the point where it is dripping off the tip.

Clean your tip thoroughly after every use or just before you use the iron so that all the impurities are gone. Wholesales and Retails Quality Assured Smartphone Accessories of Various Brands. Use a tip cleaner these usually are made from ammonium chloride and should stick to the tip when used.