How To Clean A Soldering Iron Bit

Wiping the iron on an edge of a hole cut into a sponge can help to remove oxides easier and also allows waste to fall away.

How to clean a soldering iron bit. You clean by thrusting the iron into the shaving a few times. Clean the soldering iron. Like other posters have said to make the tip last longer leave a blob of solder on the tip when you are done.

This should lead to a clean shiny tip ready for use. Make sure the sponge is damp not soaked with water. While it is hot it is oxidizing quickly.

Then dip into the tin of tinner cleaner with a slight twisting action. This can be achieved with the help of a flat-blade screwdriver Remove bit from iron never grip or bend the iron shaft this will damage the element Fit. How to clean and re tin your soldering iron Soldering tip cleaning how to clean solder tip easy - YouTube.

Your next steps should be cleaning the soldering iron using a wet sponge. To use the Tip tinnercleaner heat the soldering iron. You also can clean your soldering iron tip with a sponge while using it to keep it clean.

The dampness has nothing to do with the cleaning process - thats just the mechanical wiping. To prevent damage to the board you should re-solder your soldering iron now and then as the technique will remove solder from it as well. Reach over and unplug the iron and keep moving the solder around.

Put a good amount of solder on the tip when storing it or leaving it idle for any length of time. Just before turning it off wipe the tip and add a bit of solder to it. It consists of soft metal shavings that are coated with flux.