How To Change Soldering Iron Tips
If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the.
How to change soldering iron tips. This helps remove impurities such as remnants of solder from previous projects grease oxidation etc. Put in the new soldering tip and put the. First you can turn the iron off and wait for the iron to cool which takes a bit of time.
You just have to make sure to take your time and dont force anything. Changing the soldering tips on a PES51 pencil is very simple. I also have an Antex XS also 25W which is about 15 years old.
If it doesnt you need to remove all solder and grind the tip again more thoroughly. Tip the soldering iron downward and the loose tip should now fall out. If you want to speed things up a little bit and do it safely theres another way.
Clean Soldering Iron Tips. When I used the old cheapy soldering irons I would just tin them with regular solder and file smooth and re-tin as needed. How to clean and re tin your soldering iron - YouTube.
While not as common as the chisel and conical tips the bevel tip can be used for solder jobs that require pre-loading the iron with solder. Unscrew the locking nut that holds the tip-retaining sleeve and tip in place. These are used to replace any damaged tips and each tip serves a different purpose.
Avoid over-tightening the locking nut. If theres a stubborn piece of contaminant left on the tip you can use metal wool to gently scrape it off. The solder melts and should stick at the tip.