How To Change A Soldering Iron Tip

This step will coat the iron in a mixture of flux and solder.

How to change a soldering iron tip. The cheap things are also handy if you live in the boondocks and cant just buy a replacement tip at need. Install the prepared tip in your soldering iron. The solder melts and should stick at the tip.

Ad Compare a Huge Selection of Parts. To prevent oxidation apply a thin layer of solder to the tip after you finish soldering. The best tip tinner is your solder--tips should always be coated with a small amount of solder.

Switch on the Soldering Station or the Iron and Make sure it is Hot Enough. Well when the iron soldering warms up the iron plating which is the working surface would start oxidizing due to the temperature. How to Change a Soldering Iron Tip - YouTube.

When I used the old cheapy soldering irons I would just tin them with regular solder and file smooth and re-tin as needed. Find the small screw on the soldering iron shaft near the tip and unscrew it by inserting the screwdriver and turn counter clockwise. If some of the oxides are just sticking really well you could try to mildly abrade them on a brass sponge copper braid or similar but you cant be too hard or you will damage the iron plating good tips are typically copper core plated with iron then chromium everywhere but the.

The first thing of course is NOT to do this when the iron is hot. Turn off and unplug your iron or base. The reason is that we will for the most part be using one soldering iron only and it will be used for differing applications which constantly are changing.

Wipe OFF the solder on the Cleaning Sponge or Copper Wool. Dont know if did any good. I go through desoldering tips every 6 months or so probably damaged by the prying forces of the contacts.