How Do I Solder 2 Wires Together

After a moment or two touch the other end of the connection with the solder continue to hold the soldering iron against the wire.

How do i solder 2 wires together. Make sure your soldering iron is fully heated and touch the tip to the end of one of the wires. For most soldering work which involves electric circuitry a 15w 30w device will be suitable any device more powerful than that might do damage to your proposed piece of work. 2 Heat the joint with a soldering iron or pencil from underneath.

Heat the copper and apply solder to the side opposite the heating implement. Add a comment. Connecting two wires can be done with a wire stripper and electrical tape but to make a proper connection you should solder them together or at least use wire nutsWire nuts are screwed.

The process of soldering is taking two or more wires and joining them together and then using heat to melt electrical solder connecting those two wires permanently. Tin the soldering gun ie melt a little solder on it. For low voltage applications fan out the copper strands and then twist them together.

Im using 20-32 gauge wire so the connections have to be small and as invisible as possible but secure because I will coat in a resin after the frame is solderedTogether. When soldering you can get the hang of only melting part of the solder wrap then use a cable tie to hold the wires together the do the final melt. Let the solder melt and flow over the wires.

How to solder Craft wire together. Twist the two sections of bare wire around each other. Soldering is the process of heating tin and lead to the right temperature to melt over two or more wires to join them together.

1 clean the wires so they shine 2 twist the wires tightly together and steady the connection with clamps and 3 heat one end of the connection with the tip of the soldering iron. If the wire is stranded twist the strands together with your fingers. Tried rosen solder and flux with solder.