Best Way To Solder Small Wires

Then touch the tip of the soldering iron to the bottom side of the wire so the solder pool is in contact with the wire.

Best way to solder small wires. The wires are so small that the solder doesnt really stick so what you have to do is as quickly as possible melt the solder onto the iron but with the joint DIRECTLY in the middle of the two. First you need to strip the wires then add your heat shrink tubing physically connect the wiressolder the wires together and then shrink that heat shrink tubing to make a waterproof connection. Copper even that thin still melts at a much higher temperature than the 300C or so solder does.

This is often used in aerospace but is the worst for solder. When melting the solder to the wires try not to touch the iron with the solder. This will help conduct heat to the wire.

The shrink tubing has hotmelt glue on the inside and once you apply heat to the center solder band the solder melts the wires are held firmly in place the glue melts then the shrink tubing draws down on the wire. Soldering is something that you really only improve at by doing so the best way to get better is to just do as much soldering as you can. Then I take fine stranded wire and pull out one strand.

X Research source A couple examples of little projects you can work on are soldering a small LED light or connecting wires to a mini circuit board. Ad Low-Price High-Quality electronic Connectors Ready to Ship. If you do it right you get a big melted bead ON the iron but with the wires running through the middle of it.

Clean about 01 inches of insulation and carefully tin it. Sold in the electronics department. How to Solder Wires Together Best tips and tricks - YouTube.

Meets The EU RoHS Directive 201165EU Claim. This helps to spread out the heat when the tip touches the wires. So now you know what tools to use for soldering im going to show you the five simple steps to solder.